Electricity – Ground Fault or Arc Fault

If you were asked, "Who discovered electricity?" What would be your answer? I'm almost positive (a little electric humor) that Benjamin Franklin and his kite flying tale comes to your mind. It was not electricity that Ben discovered in 1752. It was the lightning rod. In 1800, Alessandro Volta manufactured the first battery capable to deliver a constant electric current. It was Volta, not Franklin, to discover electricity.

Many of the ways we use and deliver electricity today are still the same as in the days of Franklin and Volta. Differences in electrical potential between materials cause current to flow between them. Charges can be produced by rubbing fur or cloth over a non metallic surface. Metal wires are used to transmit electrons over long distances; but one property stands out the most. Electricity can kill!

Today, we have developed many ways to protect ourselves from the harmful effects of exposure to electric current. We use circuit breakers, surge protectors, arch fault, ground fault, and equipment grounding to safely control the flow of electrons from one place to another. Two of these safely systems generate a lot of questions. What is the difference between ground fault and arc fault?

Ground fault circuit interrupt (GFCI) protection has been around for a few decades. It is most commonly seen in areas where water is present. For instance, in modern homes, you will find GFCI protection in the kitchen near the sink, in the bathroom near the water sources, in garages, and any receptacles outside of your home. This type of protection guards against injury by monitoring how much current is flowing through it. If the GFCI detects a difference between the amounts of current leaving as opposed to returning, it shuts off. The missing current has to be going somewhere other than its intended destination. It's going to ground. A horrible place if you happened to be in the middle of the current as it's headed to ground.

Arc fault circuit interrupt (AFCI) protection has only been available to consumers for a few years. Like its parent GFCI, AFCI is designed to detect when electricity is not traveling to its intended destination. Unlike GFCI, AFCI is not protecting against the loss of current to ground. It is guarding against a broken conductor. These broken conductors are the primary cause of home fires in America today.

Primarily, AFCI is required in bedrooms. Bedrooms are notorious for having corded appliances, such as computers, alarm clocks, and desk or floor lamps in them. Many times the cords of these appliances are routed under beds, dressers, or carpets. This is not as safe as it looks. Cords are often cut by the items placed on them. Once severed, the broken conductor will arc. This arcing will continue until the metal is burned through or a circuit breaker trips. Often, the time between the initial cutting of the conductor and the tripping of the breaker is not quick enough and a fire breaks out. AFCI was designed to detect the initial arc caused by the severed conductor and immediately turn the power off.

In conclusion, electricity is the flow of electrons between items with differenting potential. If not properly controlled, this difference can have horrible repercussions, when people or property is in the way. Modern industry has taken great measures to protect us while using one of the most fundamental properties of nature – electricity.

Squishies – The Latest Craze Sweeping Middle Schools and Beyond

Kids are natural born collectors. They also love fads. Enter: the Squishy. These Japanese imports are the newest craze and are causing quite a stir. Not only are they hard to find, as they are not sold in your average store, most adults have never heard of them.

Today we will answer all of the common questions we receive about squishies. What are they? Squishies are soft “bread like” mascots, shaped as either a type of baked good, a character, or a combination of the two. They are the newest version of the stress ball, yet softer and more “kawaii” (the Japanese word for “cute”). Squishies are usually scented, cake or bread being the most common choice. Typically, squishies are attached to a cell phone strap or a lanyard.

Why do kids love them? Well, of course they are cute. Squishies are tactile and fun for kids to “squish” over and over, hence the name. Add in the sweet scent and you have a multiple sensory toy that can be quite irresistible.

Where did this fad come from? Like many great fads, this is another one of those fun and wacky imports from Japan. Japanese teens (and adults!) love to decorate their cell phones with fake treats, fruits and gems. This is called deco-den. You have probably seen someone with a Hello Kitty cell phone “blinged out” in this manner. In addition to making their cell phone covers as kawaii as can be, they also love to hang cute or funny straps from them. Cell phone straps are a huge trend in Japan, and have been for several years.

In trying to pin down how kids in the US have become obsessed with squishies, we seem to have narrowed it down one powerful source: YouTube. Search the word “squishies” in YouTube and you will find hundreds upon hundreds of videos all about them. On YouTube, kids, and even adults, trade squishies, show off their squishy collection and even attempt to make home made squishies. Two things are quite clear in watching these videos. A. these kids are absolutely obsessed with squishies. B. they want a lot of them, and the more “rare” the better.

Where can you find rare squishies, or even squishies in general? You will find the best variety in Japan. Of course, most parents are not willing to travel around the world for a five dollar trinket. Another place they seem to show up from time to time is in Japan Towns and even China Towns that exist in a handful of cities across the country. The easiest place to find them is right at your finger tips.

Using Large Aperture Settings – Digital Photography Tips

If you want your photo to be as sharp as possible then you are going to need to learn some good information about how to use the aperture settings in your camera. Improper use of this in your camera can make for photos that are not as great as they possibly can be.

There are many different measurements in photography. The measurements are measurements mostly of light and the amount of time that the photo is exposed. The aperture is something that you really should try to understand. The aperture what controls the amount of light that is let into the camera.

In photography, light is critically important and controlling it correctly will make your photos much better. The aperture is measured in F-stops. There are different values ​​of aperture that can be large and small. A larger aperture will let more light into the camera for exposure. Because more light is let in you can expose the image faster and then use a faster shutter speed. This can really be useful when you are taking pictures of fast movement and need a fast shutter speed. Also, using a fast shutter speed will ensure you do not get the camera shake effect from your hands.

Another great tool that you can do with using a large F-Stop in your aperture is that it can make your image sharper. What the larger aperture will do is make the depth of field be much smaller. This will make whatever is out of the small depth of field be out of focus. This can make the background be very out of focus and the depth of field area will be in focus. Even if you have the object in focus slightly out of focus, since it is the only area of ​​the image that is in focus it'll look much more focused. Of course, you always want to make sure your photo is as focused as possible.

Using a smaller f-stop for your aperture will require the opposite of what the larger aperture does. Because the smaller aperture will make less light to expose the image, it will make you need to use a slower shutter speed to expose more light. What happens with a smaller opening as an aperture is that the light that is let in will be much more directed and then will make for much sharper images everywhere. A small aperture can make for very sharp images through the entire z axis. This will make the background in focus and the foreground in focus. This is great when taking landscape photos or photos of large fields like football fields where you want the entire picture in focus.

Credit Repair Companies – Find Credit Experts and Certified FICO Professionals – Improve Your Score

Late payment of credit bills or defaulting from payment can seriously affect one's credit scores. It affects a person's credit in securing a loan or a credit card in the future. This can cause dangerous repercussions and leave the person dependent on others for money. It is always advisable to keep your credit score clean.

But sometimes even the most organized person may end up with a bad credit score. Luckily, the law provides a chance to help the person out the situation. This is where the credit repair companies come into picture.

ROLE OF CREDIT REPAIR COMPANIES

Credit repair companies have a primary goal to 'improve the client's credit score'. They offer legal credit solutions to help improve their client's credit score. They study the report of the client to look for any inconsistencies. Once having identified disputable items on the report, they take it up with the creditor to challenge the report. If the inconsistencies can not be verified, then the company helps you file for damages. Some companies also offer credit management services to teach the client how to maintain a good credit score.

BEWARE OF SCAM COMPANIES

A person must always be aware of the service they choose. There are companies that scam desperate people, who are badly in need of help. There are other companies that use illegal means like identity theft to make it look like there is an improvement in the credit score. It is illegal and felony to do so and if discovered, the person may face jail time.

INDICATORS OF A GOOD COMPANY

It is very easy to tell a good company from a bad one. Here are a few indicators that it is a scam.

  • The company requests for payment upfront. Any citizen is legally entitled to pay the credit repair company only after the case is settled.
  • If the company promises to erase the credit record, it is clearly a scam. It is impossible to delete it. One can only improve the credit score.
  • When the company requests the client to create a new credit identity using Employer Identification Number (EIN) instead of the social security number, it is undocumentedly a scam company.
  • If the company requests a person to file all the items in the record as false irreparable of the validity, then it is a scam.

FIND THE BEST CREDIT REPAIR COMPANY

Self acclaimed Credit pros, may not be professionals after all, although as an industry they are one of the topought after services in the country. Understandably, without money or credit life's dreams are halted in a hurry. Be sure to look for a team of certified FICO professionals, who offer professional and legal credit solutions and help can anyone with a bad credit score. Check reviews and see if the company has a record of being successful and customer friendly in all their cases. The clients' testimonials are a proof for the good work they can do.

WHAT SETS A CREDIT PROFESSIONAL APART FROM THE REST?

  • Payment is accepted only after the client's requirements are met and payment plans are also available.
  • The client can cancel their service at any time they see fit.
  • They offer life-time support for the cases they handle.
  • Team of FICO certified professional experts guarantee success and do not oversell.

If ever you have a credit record problem, you should be able to seek a free consultation from the credit experts. With upfront information and a proven track record, you can have confidence that you have found the right credit repair company to help you.